Features
     The damping rubber effectively attenuates the vibration of the machine itself.  Reduce the vibration force rumor.  To prevent the introduction of vibration force to ensure that the processing of dimensional accuracy and quality.  Control the building structure resonance propagation vibration and noise.  So that thick finishing all types of machine tools to produce production units to adapt to the development of logistics technology.
     Installation of the machine without the need to set the anchor bolts and ground fixed.  Good damping and considerable vertical deflection allow the machine to stabilize ground and save installation costs to shorten the installation cycle.  According to the production at any time to replace the machine location to eliminate the secondary installation costs.  It is possible to install the machine upstairs.
     You can adjust the machine to adjust the level of large convenient and fast.
      The use of small-colored synthetic rubber grease and coolant.
Applicable scope
     Metalworking machine tools.  Satin presses textile printing machinery food processing machines rubber machinery wire cable machinery packaging machinery generators and heavy equipment.
Applicable method
     Place the required horn into the bolt under the foot of the machine.  Rotate and load the disk to contact the real and then adjust the machine level (bolt clockwise rotation. Machine lift) adjust the machine after the level.  Tighten the nut.  Fixed horizontal state.
     Because of the creep of rubber.  When the horn is used for the first time adjust the machine level two weeks later.

Rubber hardness value	Rubber hardness value	Size  parameters		Bolts (mm)	Adjustable height (mm)	Single piece maximum static load	Parameter index
φ-H-Sh	(A )士3	φ	H	M	h	Fmax(kg)	Sz(mm)	f.z(HZ)
S78 040-15-50	50	40	15	M5×30	5	25	1.4	13
S78 080-25-50	50	80	25	M10×80	8	100	2.8	9.4
S78 080-25-60	60					170
S78 080-25-70	70					250
S78 120-32-50	50	120	32	M12×100	12	400	3.2	8.8
S78 120-32-60	60					550
S78 120-32-70	70					850
S78 120-32-80	80					1200
S78 160-35-50	50	160	35	M16×120 (M20)	12	1000	3.3	8.7
S78 160-35-60	60					1900
S78 160-35-70	70					2400
S78 160-35-80	80					3500
S78 185-39-60	60	185	39	M20×160 (M16)	12	2200	3.6	8.3
S78 185-39-70	70					3100
S78 185-39-80	80					4200
S78 210-50-60	60	210	50	M2×160 (M24)	12	2300	4	8.9
S78 210-50-70	70					3400
S78 210-50-80	80					4600
S78 228-54-60	60	228	54	M24×1.5×180(M20)	12	3300	1.5	7.5
S78 228-54-70	70					4300
S78 228-54-80	80					6500
S78 325-70-70	70	315	70	M30×2×200(M24)	12	7500	6	6.4
S78 325-70-80	80					9500

Installation diagra