Damping horn

Features
     The damping rubber effectively attenuates the vibration of the machine itself.  Reduce the vibration force rumor.  To prevent the introduction of vibration force to ensure that the processing of dimensional accuracy and quality.  Control the building structure resonance propagation vibration and noise.  So that thick finishing all types of machine tools to produce production units to adapt to the development of logistics technology.
     Installation of the machine without the need to set the anchor bolts and ground fixed.  Good damping and considerable vertical deflection allow the machine to stabilize ground and save installation costs to shorten the installation cycle.  According to the production at any time to replace the machine location to eliminate the secondary installation costs.  It is possible to install the machine upstairs.
     You can adjust the machine to adjust the level of large convenient and fast.
      The use of small-colored synthetic rubber grease and coolant.
Applicable scope
     Metalworking machine tools.  Satin presses textile printing machinery food processing machines rubber machinery wire cable machinery packaging machinery generators and heavy equipment.
Applicable method
     Place the required horn into the bolt under the foot of the machine.  Rotate and load the disk to contact the real and then adjust the machine level (bolt clockwise rotation. Machine lift) adjust the machine after the level.  Tighten the nut.  Fixed horizontal state.
     Because of the creep of rubber.  When the horn is used for the first time adjust the machine level two weeks later.

Installation diagra

Place the machine in place to place the horn in pla

Insert the bolt into the horn through the machine mounting hole.  Put down the machine to the horn     

Turn the bolt clockwise to adjust the machine level 

When the machine is flattened with a nut lock